Technogym RECLINE EXCITE, Руководство по техническому обслуживанию

Страница: 45 / 158

RECLINE EXCITE: Service & Maintenance Manual - rev. 1.3
Figure 4.6-12
35. Install the display support flange 2 , locking
down the 3 screws 10 using a 5-mm hex T-
wrench.
36. Assemble the upper handlebar cover 4 using
the 2 screws 11 and a 4-mm hex T-wrench.
Figure 4.6-13
37. On each side, assemble the lower handlebar
cover 5 with screw 12 , using a 2.5-mm hex
T-wrench.
Figure 4.6-14
38. Insert the back of the display 1 as shown in
the figure, and slide it along the display
column until it rests against the handlebar.
Continued on following page
→
Page 4.9