‘User Manual’’ Automatic Satellite Antennas TECHNO-MEDIA SRL
UMN_00094001
Rev 7
TECHNO-MEDIA SRL
Via IV Novembre 92 20021 Bollate (MI) tel. 02/48672988 - [email protected]
14
Press firmly on all four corners of the
aluminum plate and at the center of the cap
as indicated by the figure.
Do not press
above the parabola to prevent warping it.
This will irreparably damage the mechanics.
Select a suitable adhesive to fix the baseplate ABS to your roof.
Follow the instructions from the manufacturer of the glue and in any case, let
it rest at the appropriate temperature (see manual glue instructions) for at least
24 hours before starting move the vehicle.
Passage of the cables
If it was not already, make a hole for the passage of the two cables required to the antenna
operation.
After making the hole, fit the weatherproof box or the cable guide.
Run the two cables supplied in the kit if necessary with the help of an electrician's probe,
if you were to encounter resistance, DO NOT pull on the cables, you might run into the
cable break and then the antenna malfunction. Such failure is not covered by warranty.
Ethernet cable 5 meters NOT cross
