‘User Manual’’ Automatic Satellite Antennas TECHNO-MEDIA SRL
UMN_00094001
Rev 7
TECHNO-MEDIA SRL
Via IV Novembre 92 20021 Bollate (MI) tel. 02/48672988 - [email protected]
28
Programming the Receiver type
How to program the Set Top Box type
To enter the programming mode:
•
Switch off the vehicle and leave the vehicle key in the off position
•
Switch off the Receiver
•
Switch off the Beep Box
If you enter the programming mode and you want to exit it, just leave it run
and don’t touch any button. Remember that in this case the default
decoder type is moved back to the standard type which is not the correct
setting for the receivers which needs longer locking times.
1. Switch on the BeepBox and wait for the switching on beep sequence
2. Press quickly and continuously the CLOSE button until you hear a long beep.
3. If your receiver IS NOT a
‘’
SKY and/or PAY PER USE
’’
a. Wait 1 beep
b. Press and keep pressed the CLOSE button. Then a long quick sequence of
beeps is played. This is confirming that the new setting has been saved.
4. If your receiver IS a
‘’
SKY and/or PAY PER USE
’’
a. Wait 2 beep
b. Press and keep pressed the CLOSE button. Then a long quick sequence of
beeps is played. This is confirming that the new setting has been saved.
