‘User Manual’’ Automatic Satellite Antennas TECHNO-MEDIA SRL
UMN_00094001
Rev 7
TECHNO-MEDIA SRL
Via IV Novembre 92 20021 Bollate (MI) tel. 02/48672988 - [email protected]
19
At this point you can proceed to the connection of the power cables.
Even if the voltages involved are quite low, pay attention to avoid shorts
and invert connections.
BeepBox with preassembled Wires
1. Connect the
BLACK WIRE
to the negative of the battery or to the vehicle chassy
2. Connect the
RED WIRE
to +12V of the Battery.
3. Connect the
YELLOW WIRE
to a 12V line which is powered only when ignition
key is turned or the vehicle is ON.
Refer to the below picture
