TechniSat TechniBox SIR, Инструкция по эксплуатации

Страница: 61 / 220

10 Operating a rotary installation (DiSEqC 1.2)
Your digital receiver is ready for use with a motorised rotating antenna. Using the DiSEqC
control (DiSEqC level 1.2) you have the facility to control a suitable motor via the
co-axial cable.
>
As described under Point 6.5 and 6.5.1 , call up Antenna setting .
> Using the right/left arrow buttons you can change the settings.
You can choose between the settings None , DiSEqC Motor and USALS .
10.1 DiSEqC motor
If you choose the setting DiSEqC Motor , you can set the rotating motor manually. To do
this, proceed as follows:
10.1.1 Satellite
Under the menu point Satellite you can select the satellite which you wish to set.
> Using the right/left arrow buttons you can choose the satellite whose position
you wish to adjust.
10.1.2 Frequency
In the menu point Frequency you can set the test transponder which will be used to adjust
the antenna.
>
Using the right/left arrow buttons you can select the test transponder.
If you want to change the transponder data then proceed as follows:
>
Press the OK button.
The menu Edit frequency is now displayed.
In this menu you can set the frequency , the Symbol rate and the Polarisation as
described in Point 66..55..11..11 .
> To save the change push the OK button.
> In order to cancel the setting, press the Back button.
61
EE
NN
EN:bed_anl_TechniBox_IR_210610_V53_HB.qxd 27/08/2010 16:35 PÆgina 61