5 Initial installation
Once you have read the safety notes, and have connected the digital receiver as described
in Chapter 4, you can now switch on the receiver as described in Chapter 7. When you first
operate the receiver the installation wizard start window appears. The installation wizard
allows you to make the most important settings for your digital receiver in the simplest
way possible.
The setting made is accepted by pushing the
OK
button. If the initial installation is not
performed, or if it is aborted, the receiver will commence operation with a standard pre-
programmed procedure.
The initial installation process shown here serves merely as an example. The exact process
of the initial installation will depend on the settings you select. Please therefore follow all
instructions displayed on screen carefully.
Language setting
>
At the start of the installation wizard you will first see the selection window for
the
Language
.
>
Use the
arrow buttons up/down
to select the desired
operating language
.
>
Confirm by pressing
OK
.
Country setting
>
Use the
up/down arrow buttons
to select your country.
>
Confirm with
OK
, to accept the selection and to go to antenna configuration.
13
EE
NN
EN:bed_anl_TechniBox_IR_210610_V53_HB.qxd 27/08/2010 16:35 PÆgina 13
Содержание TechniBox SIR
Страница 220: ...2230000000700...
