6.4.1.2 Antenna setting
Rotating system: When operating the digital receiver on a rotating system with a
DiSEqC-Motor (Level 1.2), please note
Point 10
in the operating instructions manual.
6.4.1.3 LNB Type
>
In this line, using the
right/left arrow buttons
enter the type of LNB you are
using. You can choose from
Universal 1
,
Universal 2
,
WIDE-KU
,
WIDE-C
,
Standard
and
UNICABLE
.
6.4.1.4 Unicable
If the Unicable setting has been selected, use the
right/left arrow buttons
to select the
relevant
SaTCR ID
.
6.4.1.5 LNB Frequency
In this line you select the local oscillator frequency (LOF) of the LNB.
As standard, this is pre-programmed to
U9.7/10.60
(9750MHz/10600MHz).
>
Adjust this using the
right/left arrow buttons
to the LNB frequency
corresponding to your LNB.
6.4.1.6 DiSEqC
>
Adjust this using the
right/left arrow buttons
to the corresponding DiSEqC port.
6.4.1.7 Network search
The network information provided via the satellite includes, for example, details concerning
the available transponders. This information is used during the network search.
>
Switch the network search
ON
and
OFF
using the
right/left arrow buttons
.
6.4.1.8 FTA only
If, during the satellite search, you are looking only for free-to-air channels, then you should
select the setting
FTA only
.
>
Switch the search mode FTA only
ON
and
OFF
using the
right/left arrow buttons
.
6.4.1.9 22kHz Sound
The switching on of the 22 kHz sound is only available for the LNB types Wide-C and
Standard. With all other LNB types, the setting is automatic.
>
Switch the 22 kHz sound
ON
and
OFF
using the
right/left arrow buttons
.
6.4.1.10 LNB Power supply
LNBs are supplied with power via the coaxial cable, and the receiver provides a voltage of
14 or 18 Volt.
>
Switch the LNB power supply
ON
and
OFF
using the
right/left arrow buttons
.
25
EE
NN
EN:bed_anl_TechniBox_IR_210610_V53_HB.qxd 27/08/2010 16:35 PÆgina 25
Содержание TechniBox SIR
Страница 220: ...2230000000700...
