TechniSat TechniBox SIR, Инструкция по эксплуатации

Страница: 59 / 220

> Highlight the menu line Factory setting using the Up/down arrow buttons .
> Confirm with OK .
The note appears saying that all settings will be reset to the factory settings.
> You can use the right/left arrow keys to select whether the unit should keep the
existing channel list after factory setting, the pre-programmed channel list should be
loaded or whether an empty channel list should be used on start-up.
> Confirm with the OK button, to carry out the factory setting.
After calling up this function the factory settings are restored. Certain settings are deleted
and the installation wizard will be started.
9.8 IRDETO CA Status
This menu item will give you access to the installed IRDETO Smartcard and enable you to
call up its data and settings.
9.9 Common Interface
This menu item will give you access to the installed CI module submenu and enable you to
call up its data and settings.
59
EE
NN
EN:bed_anl_TechniBox_IR_210610_V53_HB.qxd 27/08/2010 16:35 PÆgina 59