Technibel GR 12X, Руководство по установке, Страница: 1 / 27

37.4163.125.1 06/97 10 11 305 F.GB.I.E.D.00
DECLARATION OF CONFORMITY
This product is marked as it satisfies Directives:
– Low voltage no. 73/23 EEC and 93/68 EEC.
– Electromagnetic compatibility no. 89/336 ECC, 92/31 EEC
and 93/68 EEC.
This declaration will become void in case of of misusage
and/or non observance though partial of manu fa c t u r e r ' s
installation and/or operating instructions.
COOLING ONLY MODELS
OPERATING LIMITS
Maximum conditions
Outdoor temperature :
52°C D.B.*
Room temperature : 35°C D.B. / 22.5°C W.B.
Minimum conditions
Outdoor temperature :
19°C D.B.**
Room temperature : 19°C D.B. / 14°C W.B.
HEAT PUMP MODELS
OPERATING LIMITS
Cooling Maximum conditions
Outdoor temperature :
46°C D.B.
Room temperature : 35°C D.B. / 22°C W.B.
Cooling Minimum conditions
Outdoor temperature :
19°C D.B.
Room temperature : 19°C D.B. / 14°C W.B.
Heating Maximum conditions
Outdoor temperature :
24°C D.B. / 18°C W.B.
Room temperature : 27°C D.B.
Heating Minimum conditions
Outdoor temperature :
–8°C D.B. / –9°C W.B.
ACCESSORIES SUPPLIED WITH THE UNIT
PARTS FIGURE Q.TY PARTS FIGURE Q.TY
RAWL PLUG 7
PLASTIC
1
COVER
HEX
1
WRENCH
TAPPING
6
SCREW
REMOTE
1
CONTROL UNIT
R E M OTE CONTRO L
1
UNIT SCREW
AAA ALKALINE
2
BATTERY
DRAIN
1
ELBOW
*
Model Combinations
Combine indoor and outdoor units only as listed below.
COOLING ONLY MODELS
Indoor Units Outdoor Units
MA74C5 GR73C5
MA94C5 GR93C5
MA125C5 GR125C5
MA184C5 GR185C5
GR185C7
MA224C5 GR226C5
GR226C7
HEAT PUMP MODELS
MA75R5 GR75R5
MA95R5 GR95R5
MA125R5 GR124R5
MA185R5 GR184R5
MA225R5 GR224R5
Power Supply:
The last digit(s) of the model number indicates the required
power supply to the unit.
5 : 220 - 240 V ~ 50 Hz / 7 : 380-400 V - 3N ~ 50 Hz
Last digit(s) of the model number
Tools required for installation (not supplied)
1 1. Standard screwdriver
1 2. Phillips head screwdriver
1 3. Knife or wire stripper
1 4. Tape measure
1 5. Level
1 6. Sabre saw or key hole saw
1 7. Hacksaw
1 8. Core bits ø 5
1 9. Hammer
10. Drill
11. Tube cutter
12. Tube flaring tool
13. Torque wrench
14. Adjustable wrench
15. Reamer (for reburring)
*
Available only for heat pump models.
INSTALLATION INSTRUCTIONS
- Split system air conditioner -