Techni-Lux MagicQ Pro Series, Руководство пользователя

Страница: 138 / 377

MagicQ User Manual
109 / 348
14.5 Editing using Update
MagicQ supports a function for easy updating of Cues and Palettes without first Including the Cues and Palettes. This is useful
when making modifications to a pre-programmed show.
When you press Update (when not in Include Mode) a list of all the Palettes and Cues that have been over-riden is shown. You
can then choose which of the Palettes and Cues to update by selecting from the select box. One you have finished your selection
press the “Done” button. You can press “Cancel” at any point to cancel the Update.
When using a tracking Cue Stack, MagicQ will show all the Cues that have been overriden in the Stack – hence you can make
an update even if the attributes were used in a previous Cue on that Cue Stack.
Pressing SHIFT + UPDATE forces an update using the above method even if a Cue was previously included.
14.6 Direct Modification of Intensities in Cues
To add or change the intensity of heads (or dimmer channels) recorded into a Cue on a Playback without using the programmer,
press and hold the SELECT button of the Playback with the Cue to be modified. Then use the keypad to adjust the intensity
channels – e.g. typing 1 THRU 4 @ FULL will add channels 1 to 4 at FULL into the current Cue on the Playback. The change
is immediate and permanent. The programmer is not affected.
Setting intensities in a Cue can be absolute - e.g. setting some heads to 50% - or relative, e.g. setting some heads +10% where
they are already used.
To remove a level from the current Cue on a Cue Stack – hold the S button and set the channel at the special level . .
For example, whilst holding S type
1 @ FULL Sets head 1 to FULL in current cue on Playback with S held 1 @ +10 Adjusts head 1 int10% in current cue
on Playback with S held 1 @ FULL THRU Sets head 1 to FULL in all cues on Playback with S held 1 @ +10 THRU Adjusts
head 1 int10% in all cues on Playback with S held 1 @ .. THRU Removes head 1 intensity in all cues on Playback with
S held
Note that in order to use THRU at the end of the syntax line to select all Cues in the Playback the Setup option, View Setup,
View Settings, Keypad, Auto Enter on Intensity Set, must be set to No.