technetix AIMA3000, Руководство пользователя

Страница: 59 / 65

AIMA3000.RRAS/G/R Product User Manual
Technetix Group Limited
sales@technetix.com • technetix.com Jan/2018 - V2 59
7.11 Redundancy Confi guration and Alarms (for RRAR only)
Click on ”Modules” → ”RRAR-Q” (the module name), the port numbers and ”Redundancy” button will appear. The port
confi guration pages and alarm pages are completely same to RRAS.
Click on ”Redundancy” on the left, the redundancy confi guration page will appear.
In the box of ”Redundancy Information” , you can check not only the local module’s slot number and module type, but also
the peer module’s IP address, slot number and serial number.
In
”Unit Redundancy Status” box, ”Redundancy Alarm” indicator and ”Redundancy Status” show the module’s
redundancy status.
You can confi gure the module’s redundancy in the box
”Unit Redundancy Confi guration” :
”Redundancy Enable” is to enable or disable the function of redundancy of this module;
”Work Mode” is to set this module to work in primary or secondary mode;
”Revert Enable” is to set whether the primary path will be reconnected when its signal gets normal.
”Wait to Restore Time” is the revert delay of the primary path when it gets normal.
”Redundancy Alarm” is to set the alarm level as major, minor or disable.
In the box of ”Port Redundancy Information” , you can enable or disable each port’s redundancy, set their local status
alarm level and confi guration alarm level individually.
Please click on
”Submit” to save your confi gurations whenever you make new settings on them.
Click on ”Alarms” → ”RRAR-Q” (the module name)→ ”Redundancy” , the redundancy alarm page will appear.
In this page, you can see the redundancy alarm status of the module, and each port’s local status and confi guration status.
Click on
”Refresh” to update the current alarm status.