technetix AIMA3000, Руководство пользователя

Страница: 27 / 65

AIMA3000.RRAS/G/R Product User Manual
Technetix Group Limited
sales@technetix.com • technetix.com Jan/2018 - V2 27
6 Installation
6.1 Preparatory Work for Installation
Before installing this device, you must ensure that the unit is intact and ready for installation.
Unpack and check the unit: Open the box to check for any damage that may have occurred during shipment.
If damage is found, please contact a Technetix customer support representative.
Necessary equipment and tools for installation:
Table 5-1 Necessary equipment and tools for installation
Tools/Modules Description
Phillips screwdriver PH1/PH2 For use with the AIMA3000 chassis
RRAS / RRAG / RRAR Module The module to install into the AIMA3000 chassis
No. Description Qty
1 RRAS / RRAG / RRAR Module 1
2 Individual test sheet (Certificate of Performance) 1
6.2 Unpacking
Unpack the module. Keep the packaging materials for future transport needs.
Check the package manifest, record the product module type, serial number, purchase date, and any other
relevant information to facilitate later management and maintenance.
Table 6-2 Packing Manifest
6.3 Power and Cooling Requirements
The RRAS / RRAG / RRAR module is powered by the power supply in the AIMA3000 chassis. The module can consume up
to 8 W.
The RRAS / RRAG / RRAR module and its corresponding AIMA3000 chassis should be located in an environment where
the temperature range is from -5 ºC to +55 ºC with the AIMA3000 fans running.
If the temperature exceeds these limits, the AIMA3000 should be relocated in the equipment rack where the ambient
temperature is less than +55 ºC.
The AIMA3000 chassis should have adequate ventilation clearance. See the installation and operating instructions for
your AIMA3000 chassis.