technetix AIMA3000, Руководство пользователя

Страница: 36 / 65

AIMA3000.RRAS/G/R Product User Manual
Technetix Group Limited
sales@technetix.com • technetix.com Jan/2018 - V2 36
6.7 Redundancy Connection (for RRAR only)
(a) Redundancy Cable Brace Mounting Hole on Chassis (d) Mounting the Redundancy Cable Assembly to the Chassis
(c) Redundancy Cable and its Brace
Mounting holes for chassis
Assembling holes for
the two sub assemblies
(b) Redundancy Cable Brace
1. Unfasten the screw in fi gure (a);
2. Fasten the sub assemblies of redundancy cable brace in fi gure (b), and then insert the USB connector of the
redundancy cable to it, as shown in fi gure (c).
3. Mounting the assembly of redundancy cable and its brace to the brace mounting holes on chassis by tightening
the securing screw, as shown in fi gure (d).
6.8 Power-on testing
After installing the module, power-on the chassis.
When the module has been installed, if the chassis is powered, all LED indicators on the front panel will show a blinking
green light, indicating the module is initiating.
If the input signals are normal, the “STAT” LED indicator will cease to blink in about 5 seconds and remain constant green
afterwards. At the same time, the “RX” LED indicators will also remain constant green when the signals are normal.
If the optical input signal is out of the expected range, the “STAT” and “RX” LED indicator will show constant orange or red.