Techmach AWG5000, Руководство по эксплуатации

Страница: 14 / 32

ጝሁႠీ!ਝൽጆॆ
12
z z z z z
Edge Detector: Place at the edge of the web. The edge detector’s null indictor LED will turn off when the edge detector
is positioned correctly. The scribed lines on the edge detector indicate the approximate location of the detector’s guide
point.
Note
The default calibration supplied with the system should work for most materials. However, if the null
indicator LED does not turn off the detector may need to be calibrated.
e).Press the AUTOMATIC button
f).Move the sensor left or right slowly and observe how the guide reacts. The guide should move the web so that it
follows (or chases) the movement of the sensor.
z z
z z
z
Edge Detector: The guide should move the web so that the edge of the web is always aligned with the edge
detector’s guide point.
Note:
If the web guide does not follow the movement of the sensor and moves in same direction with offset of web
materials, then the sensor polarity not correct and must be changed. Refer to the system configuration
section of this manual for more information.