Techmach AWG5000, Руководство по эксплуатации

Страница: 7 / 32

ጝሁႠీ!ਝൽጆॆ
5
Introduction
AWG5000 is a high performance web guiding system with high accuracy, stability and reliability and quite simple to install
or operate. This system is compatible with Techmach’s compensated ultrasonic edge detectors, compensated IR edge
detectors and Linear Actuator.
Addition, AWG5000 support Ethernet, CAN and RS485 network communication and allowed to be remotely controlled by
a remote station or terminal.
A typical AWG5000 controlling system including four main components:
1.Web guide control enclosure
z
The control board is opto-isolated with PWM motor board, which enhances system’s reliability;
z
The System could save up to 128 unique non-volatile memory for user’s settable parameters and operating modes, and
auto-recovery after power interruption;
z
On-board parameter entry touch keypad control and 5 digits of LED display in bright blue colo;
z
Actuator end-of-travel limit:
Potentiometer input for electronically-adjustable limits;
Limit switch inputs for adjustable limits;
z
Input voltage: 24VDC, 12VDC;
z
Network: THERNET, CANBUS, RS485.
2.Switch power supply
z
Switch-selectable input voltage: single-phase, 220 20% VAC, 50HZ;
z
Output voltage: 24VDC [+V1 –V1]; 12VDC[+V2 –V2]
Caution:
z z z z z
The information contained herein is accurate at the time of publication, Techmach reserves the right to
make design changes to equipment described in this manual at any time and without notice.
z z z z z
The technician should comply with local rules during the installing process.
z z z z z
This mechanism should be installed, activated and operated by qualified person.
z z z z z
Remove manually allowed.
+
-