Techmach AWG5000, Руководство по эксплуатации

Страница: 13 / 32

ጝሁႠీ!ਝൽጆॆ
11
Terminal Name
Terminal code
wiring color
blue Green Brown Red Yellow
User’s wiring
CAUTION:
If the actuator or guide mechanism hits a mechanical obstruction before the actuator stops automatically
at its end-of-travel limit, release the button immediately. Continued activation will cause serious damage
to the actuator motor and/or guide mechanism.
4).Switch power supply
CAUTION:
Make sure the terminal earthed with PE( protect earth) completely.
Adjustment
Refer to connection drawing of Appendix V to complete the whole electric connection.
„ „ „ „ „
Static Test
a).Turn the power switch on;
b).Press the MANUAL button;
c).Press the IN and Out buttons several times. The actuator and web guide mechanism should move freely and
without hesitation;
d). Press and hold the IN button. When the guide mechanism gets near the In limit, release the button;
e). Jog the IN button repeatedly until the actuator automatically stops at its end-of-travel limit.
f). Repeat the previous two steps using the OUT button to check the Out limit.
g). Press the CENTER button and verify that the actuator drives to the center of its stroke.
„ „ „ „ „
Dynamic Test
a).Press CENTER button and verify that the actuator drivers to the center of its stroke. This also places the web guide in
its center (or tram) position;
b).Thread the web through the machine and put a slight tension on it so the web is in its normal operating position.
Repeat steps c) through f) for each sensor;
c).Press the CENTER button;
d).Position the sensor.