Team SILK AXL012, Инструкция по эксплуатации

Страница: 9 / 68

SX012/AXL012 Flange Facing and Grooving Machine
8
A fixed gear ring is attached to the drive cover and is used in conjunction with the
saddle pick-up gear, which revolves as the saddle rotates, to give the saddle its
feed source.
Spur ring gear
The spur ring gear assembly, which is the rotating part of the machine, is clamped
to the cross-roller bearing assembly by a clamp plate and the ring gear provides
the clamping location for the saddle assembly. An idler gear in the drive assembly
drives the spur ring gear.
1.2.2 Saddle
The saddle is mounted on the drive ring located within the drive ring assembly and
provides a rigid structure to which the toolpost is fixed.
Drive input to the toolpost feed gearbox is derived from the drive ring pick-up gear
that rotates around the fixed internal gear located in the drive ring assembly in a
planetary motion.
Toolpost traverse in and out is provided by a leadscrew which is driven by the
saddle gear train. Traverse is selected by the traverse selector.
The saddle can achieve cuts to a maximum depth of 1 mm (0.040 in) without
flanged holes and 0.5 mm (0.020 in) with flanged holes.
Alternative toolposts can be fitted to the saddle depending on the machine
application. For cutting tools and surface finish refer to Appendices A and B at the
end of this manual.
Fig. 3 Saddle