114-106497
Rev 5
16
of 22
NOTE
Align the plug housing with header assembly or cap
housing and then mate them without giving “KOJIRI” motions. Be sure
that they are locked in position.
Figure 9
3.9.
Unmating Connectors
To disengage mating connectors, depress latch of plug housing with thumbnail, and pull the connectors apart.
Refer to Figure 10.
During
unmating connector, please don’t stack up the wire to the middle in case damage the connector, the
correct operation should be gripping the wire in up and down direction, as Figure 11 show.
NOTE
DO NOT pull the connectors by the wires.
Depress Locking Latch Here
Pull Straight Away
Single Row
Pull Straight Away
Depress Locking Latch Here
Содержание SGI 1.25
Страница 15: ...114 106497 Rev 5 15 of 22 Dual Row...
