114-106497
Rev 5
11
of 22
Figure 5
3.5.
Inserting Contact into Housing
Grasp the wire directly behind the contact insulation barre and push the contact straight into the cavity until it
bottoms (there should be an audible click). Be aware that the contact must be installed in correct orientation as
specified below. Pull back lightly on the wire to be sure the contact is locked in place. Refer to Figure 6
Side-to-Side Alignment
3°
Max
3°
Max
1°
Max
5
°
Max
Datum Line
Up and Down Alignment
NOTE:
Angles are drawn for clarification only and are not to scale.
Plug Single Row
Be aware of contact
install orientation
Be aware of contact
install orientation
Plug Dual Row
Содержание SGI 1.25
Страница 15: ...114 106497 Rev 5 15 of 22 Dual Row...
