TE Connectivity Crimp Quality Monitor II, Руководство пользователя

Страница: 39 / 59

409-10100
39 of 59
Rev C
Data Description:
CRIMP RESULT DATA
INSTANCE ID - production run identifier.
CRIMP ID - a unique identifier for the crimp in the production run.
OVERALL RESULT - final result of all the analysis methods.
BATCH COUNT - number of PASS crimps in the batch after the crimp.
TOTAL COUNT - number of PASS crimps in the production run after the crimp.
TIME STAMP - coded time stamp that represents the date and time of the crimp.
CQM NUMBER - source CQM Unit number. (always 0)
IDLE FORCE - idle force detected when the crimp occurred.
IDLE POSITION - idle position detected when the crimp occurred.
PART NAME - part name.
SEQUENCE POSITION - position in the sequence. (always 1)
CRIMP MODE - CQM unit mode when the crimp occurred.
CRIMP NUMBER - number of crimps since powered on.
CALIBRATE RESULTS DATA (ONLY SHOWN FOR CALIBRATE CRIMPS)
GAIN VALUE - gain value after the gain calibration crimp.
HAND MEASURED CRIMP HEIGHT - entered measured crimp height during calibration.
CALIBRATE RESULT - True or False.
CRIMP HEIGHT HISTORY DATA (ONLY SHOWN FOR PRODUCTION MODE CRIMPS)
CRIMP RESULT - Pass or FailL from crimp height analysis
MEASURED CRIMP HEIGHT - crimp height value from the crimp height analysis
UCL - upper control limit
LCL - lower control limi
NOMINAL CRIMP HEIGHT - crimp height desired and set in the part.
CONTROL LIMIT - value calculated or set in the part.
CALCULATE CONTROL LIMIT - True or False.
CRIMP HEIGHT TOLERANCE - allowable tolerance set in the part.
PEAK FORCE HISTORY DATA (PEAK FORCE ANALYSIS)
PEAK FORCE RESULT - PASS or FAIL or LEARN from peak force analysis
FORCE - peak force value from the peak force analysis
UCL - upper control limit
LCL - lower control limit
SENSITIVITY - sensitivity setting for the peak force analysis