409-10100
14 of 59
Rev C
process, you must evaluate the crimp and ensure that it meets your acceptance criteria. The CQM II starts
fully analyzing crimps once it is in the Production Mode. For those systems with Crimp Height Monitoring
enabled, Crimp Height is evaluated during each learn crimp, so if there is a crimp outside of the tolerance, you
will be notified and that crimp will not be used for learning.
During the Learn process you can choose to have each Accepted Learn crimp be counted in the total and
batch counts. Select Add Accepted Learn Crimps to Production.
F. CQM Settings -- Control Limit Tab
Choose the Control Limit tab to set the control count and if you desire to have the CQM Perform Control Limit
Checks.
If you have selected to perform control limit checks, then upon receiving a number of consecutive control
limits equal to the Control Count will cause a control count error message to be displayed.
G. CQM Settings -- Graphing Tab
Choose the Graphing tab to select the number of crimp history points to display on the Basic production
screen.
Содержание Crimp Quality Monitor II
Страница 30: ...409 10100 30 of 59 Rev C...
Страница 41: ...409 10100 41 of 59 Rev C...
