Host Module
CQM/DAQ
Module
ON/OFF
Switch
Power Supply
(Not Shown)
409-10100
3 of 59
Rev C
Figure 1
1. INTRODUCTION
Crimp Quality Monitor II (CQM II)
provides immediate inspection of the crimp height and the work curve of a
crimp by analysis of data provided by force and position sensors. The sensors may be built into special Crimp
Quality Monitor II (CQM II) applicators or installed into the terminating machine. The Crimp Quality Monitor
notifies the operator with visual cues when faulty crimps occur. See Figure 1 to view the CQM II
NOTE
i
The Crimp Quality Monitor II is a PROCESS monitor. It is influenced by many variables, that include changes in wire,
terminal, applicator terminal condition, operator, environment, etc. Changes in any of these variables, will affect
the process and the process will have to be re-learned.
Although the Crimp Quality Monitor II was designed for many machines, when the CQM II is installed on an
AMP–O–LECTRIC* Model “G” Terminating Machine equipped with the crimp height adjustment motor, the
CQM II will automatically adjust the crimp height to keep the process at nominal.
The CQM’s operation, functions, screens, and touchscreen inputs are detailed in this document. Refer to
customer manuals and instructions shipped with the application equipment for machine information.
Содержание Crimp Quality Monitor II
Страница 30: ...409 10100 30 of 59 Rev C...
Страница 41: ...409 10100 41 of 59 Rev C...
