409-10100
59 of 59
Rev C
8.4. Quality Control Maintenance
Your quality control personnel should perform regular inspections. A record of quality control inspections should
remain with the personnel responsible for the CQM. TE recommends one inspection a month; however, operator
skill, amount of use, ambient working conditions, and your company’s established standards are all factors in
establishing frequency of inspections.
1. Remove any accumulated film with a suitable cleaning agent.
2. Make sure all components are in place and are properly secured.
3. Make sure that the cooling vents on the back and side panels are not blocked.
8.5. Evaluation and Repair
Crimp Quality Monitors can be returned to TE for evaluation and repair. Call the TE
Tooling Assistance Center at
1–800–722–1111 for instructions.
Crimp Quality Monitors can be ordered through your TE representative, or call 1–800–526–5142, or send a
facsimile of your purchase order to 1–717–986–7605, or write to:
CUSTOMER SERVICE (038-035)
TYCO ELECTRONICS CORPORATION
PO BOX 3608
HARRISBURG PA 17105-3608
9. REVISION SUMMARY
Since the previous release of this manual:
•
Paragraph 3.3, System Settings was added;
•
Paragraph 4.1, Options was added;
•
The “learn” mode was expanded
•
Section 2.8,A was revised;
•
Screens were updated; and the
•
Logo and format were updated
•
Figures were referenced
Содержание Crimp Quality Monitor II
Страница 30: ...409 10100 30 of 59 Rev C...
Страница 41: ...409 10100 41 of 59 Rev C...
