TDSi SOLOgarde, Руководство пользователя

Страница: 30 / 37

4.2.3 4.2.3 4.2.3 4.2.3 Navigating the Menu System Using the Shortcut Keys Navigating the Menu System Using the Shortcut Keys Navigating the Menu System Using the Shortcut Keys Navigating the Menu System Using the Shortcut Keys
The menu structure can also be navigated using shortcut keys. This greatly reduces the number of key pressed required
to gain access to the menu items and therefore reduces the system programming time. The feature works by pressing the
numeric keys that correspond to menu options.
For example, to view the Software Version of the SOLOgarde controller:
The first item in the menu is the ACU ACU ACU ACU option (the one that is highlighted). This is option 1 and if by
pressing the numeric key 1 1 1 1, it will be selected.
The programmer now presents the options in the ACU ACU ACU ACU menu. System Information (Sys info Sys info Sys info Sys info) is the 5
th
option in the menu system so if key 5 5 5 5 is now pressed, the System Information menu will be selected.
Finally to display the software version, the Version Version Version Version menu option would need to be selected, which is the
5 th option in the menu. Select it by pressing key 5
5 5
5.
So from logging in to displaying the software version simply press the keys 1
1 1
1, 5
5 5
5, 5
5 5
5 in sequence and the Version
Version Version
Version menu is
accessed in just three key presses.
Use the #
# #
# key to escape out of menus or delete entries as necessary, referring to section 4.2.1 of this manual.
Appendix A shows the full menu structure together with the numeric keys that correspond to each menu option.
4.3 4.3 4.3 4.3 Switching Off Switching Off Switching Off Switching Off the SOLOgarde Hand the SOLOgarde Hand the SOLOgarde Hand the SOLOgarde Hand----Held Programmer and Disconnecting Held Programmer and Disconnecting Held Programmer and Disconnecting Held Programmer and Disconnecting
The SOLOgarde hand-held programmer will shut down automatically after 5 minutes of inactivity to conserve battery
power. This will occur regardless of whether the programmer is connected to the SOLOgarde reader or not.
Turn the programmer off by pressing and holding the power button at the top of
the unit until the display goes blank. The unit is now switched off.
Disconnect the SOLOgarde hand-held programmer from the reader by gently
pulling on the plug housing.
Note: do not pull on the lead ot Note: do not pull on the lead ot Note: do not pull on the lead ot Note: do not pull on the lead otherwise it may become damaged. herwise it may become damaged. herwise it may become damaged. herwise it may become damaged.
Should the programmer be disconnected from the SOLOgarde reader before it has been switched off, the programmer will
automatically log out of the controller and the Connect
Connect Connect Connect screen will be displayed.