TDSi SOLOgarde, Руководство пользователя

Страница: 13 / 37

Figure Figure Figure Figure 9 9 9 9 –––– Wiring the Door Lock (Fail Secure Oper Wiring the Door Lock (Fail Secure Oper Wiring the Door Lock (Fail Secure Oper Wiring the Door Lock (Fail Secure Operation) ation) ation) ation)
Door Lock
Door Lock Door Lock
Door Lock –––– Fail Secure
Fail Secure Fail Secure
Fail Secure
Connect the door lock between the +12 V supply
and the Com terminal. Link the 0V and N/O
terminals.
Note: A suppression diode MUST be fitted at
Note: A suppression diode MUST be fitted at Note: A suppression diode MUST be fitted at
Note: A suppression diode MUST be fitted at
the door lock. Failure to do so may result in
the door lock. Failure to do so may result in the door lock. Failure to do so may result in
the door lock. Failure to do so may result in
permanent irreparable damage t
permanent irreparable damage t permanent irreparable damage t
permanent irreparable damage to the
o the o the
o the
controller.
controller. controller.
controller.
Figure Figure Figure Figure 10 10 10 10 –––– Wiring an External Alarm Device Wiring an External Alarm Device Wiring an External Alarm Device Wiring an External Alarm Device
External Alarm External Alarm External Alarm External Alarm
The Alarm output is capable of driving an external
alarm device up to 1A. Connect the unit between
the Alarm + and Alarm – terminals. Fit the link JJJJP2
P2 P2 P2
to supply the external device with power from the
SOLOgarde PCB.
Figure Figure Figure Figure 11 11 11 11 –––– Wiring the Door Contact Wiring the Door Contact Wiring the Door Contact Wiring the Door Contact
Door Sense Door Sense Door Sense Door Sense
Wire a door contact (normally open type) between
the Sense
Sense Sense Sense and Common Common Common Common terminals. Make sure that
the Door Sense Bypass Link jumper JP5 (circled) is
not fitted.
+12 V