NOTE:
You are strongly advised to install the TDK DVD-R/RW writer with a master*
device jumper setting. DMA (Direct Memory Access) must be enabled on your
computer system to achieve optimum writing speed (also see “Enabling DMA (Direct Memory
Access)” for further details).
How to install the TDK DVD-R/RW writer
Figure 8:
How to install the TDK DVD-R/RW writer.
CS SL MA
B
HARD DISK
TDK DVD-R/RW writer’s
correct jumper setting:
connect TDK DVD-R/RW
writer as master
Secondary
IDE port
Primary
IDE port
connected as master
connected as slave
HARD DISK
CS SL MA
A
HARD DISK
HARD DISK
TDK TDK DVD-R/RW writer’s
correct jumper setting:
CD-ROM
connect TDK DVD-R/RW
writer as master
Secondary
IDE port
Primary
IDE port
connect as slave
connected as master
connected as slave
25