31
10. Connect an internal power cable to the TDK DVD-R/RW writer’s DC INPUT connector. Most
computers provide spare internal power connectors. Check the cable running from the hard
disk* to the computer’s internal power supply and see if there are any spare connectors. If
so, you can plug one of these into the power socket at the rear of the TDK DVD-R/RW
writer.
11. Connect the audio cable if you want to use a soundcard* in your system with non-TDK
audio playback software. This cable runs from the four-pin audio output* connector at the
rear of your TDK DVD-R/RW writer to your soundcard*. Also see “Using soundcards and
audio cables” on for more information.
12. Mount the TDK DVD-R/RW writer in the computer using only the four screws supplied with
your drive.
NOTE:
Do not mount the drive in your computer using screws other than those supplied
by TDK. You may damage the drive if you insert screws that are too long.
31