Cannot use other
DVD/CD-ROM drives
to read DVD-RW/CD-
RW discs written by
TDK DVD-R/RW
writer. (cont.)
Excessive noise.
Excessive vibration.
Slow read
performance.
Can read only the last
session of a multi-
session DVD-R, DVD-
RW, CD-R or CD-RW
disc.
2. Refer to your packet
writing* software manual for
details on how to obtain and
install a UDF* reader.
3. Reload this disc and use
the same software originally
used to write to it. Then
close the session/disc.
1. Ensure that no adhesive
label is attached to the disc
surface.
Caution:
In case an
adhesive label is attached to
the disc, do not tear it off,
as this could damage the
disc.
Clean the disc as detailed.
1. Use DVD-R/-RW or CD-
R/-RW mastering software
to import session(s). Such
features may vary in name
depending on the software
used. Please refer to the
appropriate user’s manual
regarding this feature.
2. The UDF* reader required
to use a CD-ROM drive for
reading CD-RW or packet
written discs is not installed.
3. A CD-R recording session
was left open and lacks a
“Table of Contents”.
1. Disc is poorly balanced.
Low-quality or unevenly
labelled discs can cause
significant vibration and read
errors at high reading
speeds.
1. “Import previous session”
or a similar feature was not
enabled when the multi-
session disc was created.
SYMPTOMS POSSIBLE
CAUSES
POSSIBLE
SOLUTIONS
43
