TDK-Lambda GENESYS 15KW, Руководство пользователя, Страница: 55 / 103

49
83532002 Rev H
Table 4-4: J1 Connector Terminals and Functions
J1 contact Signal name Function Section
J1-1 ENA_IN Enable/Disable the Power Supply output by dry-contact (short/open)
with ENA_OUT. 5.8
J1-2
J1-3 IF_COM Isolated Interface Common. Return for the SO control, PS_OK signal
and for the optional IEEE, LAN or USB interface. 5.7
5.10
J1-4
ι
7
N/C No Connection
J1-8 LOCAL/
REMOTE Input for selecting between Local or Remote analog programming of
Output voltage and Output current. 7.2
J1-9 VPGM Input for remote analog voltage/resistance programming of the Output
voltage. 7.1, 7.4
J1-10 IPGM Input for remote analog voltage/resistance programming of the Output
current. 7.1, 7.4
J1-11 VMON Output for monitoring the Power Supply Output voltage. 7.6
J1-12 COM Control Common. Return for VMON, IMON, CV/CC, LOC/REM.
Connected internally to the negative local sense (-LS) potential.
J1-13 CV/CC Output for Constant-Voltage/Constant-Current mode indication. 5.9
J1-14 ENA_OUT Enable/Disable the power supply output by dry-contact (short/open)
with ENA_IN. 5.8
J1-15 SO Input for Shut-Off control of the power supply output. 5.7
J1-16 PS_OK Output for indication of the power supply status. 5.10
J1-17
ι
20
N/C No Connection.
J1-21 LOC/REM
SIGNAL Output for indicating if the unit is in Local or Remote analog
programming mode. 7.3
J1-22 VPGM_RTN Return for VPGM input.
Connected internally to the “-LS” potential.
7.1
7.4
7.5
J1-23 IPGM_RTN Return for IPGM input.
Connected internally to the “-LS” potential for models with Vout < 30V.
Floating for models with 30V
≤
Vout
≤
600V.
7.1
7.4
7.5
J1-24 IMON Output for monitoring the Power Supply Output current. 7.6
J1-25 P Output for current balance in parallel operation. 6.2