TC Electronic Konnekt Live, Руководство пользователя

Страница: 22 / 60

SETUP PAGE
20
6 Mixer View - (digital)
The Mixer View function gives you a few options
regarding the appearance of the digital channels on
the Mixer page.
Stereo Link: Press Stereo Link
Hide: Digital channels are not shown on the mixer page.
Show: Digital channels are always shown on the mixer page.
Autoshow
Digital channels are only shown on the mixer page if a
valid digital signal is present on at least one of the
digital inputs.
Monitor
Mixer (Direct monitoring)
Konnekt offers a direct monitoring feature that allows
monitoring of the input signal on the outputs with no
latency.
7 Light Ring Assign(ment)
The LED lightring around the SOURCE level knob
indicates the source level of the channel you have
selected. Using the Ch Select button on the front
panel you can select between:
Adat 1+2 / optical s/pdif
Adat 3+4
Adat 5+6
Adat 7+8 / coaxial s/pdif
DAW main
Fabrik R Live Level / Decay
Mixer level / dim level
Tuner Pitch / Tone
MIDI
MIDI mode - When MIDI mode is selected the “Source
Level” encoder on the front panel can be used to send
MIDI CC values on MIDI out.
• Select which MIDI channel to send MIDI CCs on.
• Select which MIDI CC to send.
Normal mode - is when you simply turn the “Source
level” encoder, - clockwise or counter-clockwise.
Push mode - is when you press in the encoder and turn at
the same time.
8 Linked Devices
Up to four Konnekt units can be connected. You will
most likely only monitor the physical outputs of one of
the units. E.g., - you have only connected the outputs
of one of your Konnekts to your active speakers, right?
However, with the Linked Devices option you can
monitor any input of any Konnekt unit in the system
thru the same outputs.
Example:
We have 2 units in the system. The linked device will
appear under “Linked devices” as illustrated below. If
a third or fourth Konnekt was in the system - these
would appear below also.