TC Electronic Konnekt Live, Руководство пользователя

Страница: 8 / 60

6
Up and running in 10 minutes
This quick-guide will help you set up the Konnekt
Live in a typical application. For further details
please refer to later sections of this manual.
Unpacking
• Open the box from the top and remove cabling.
• Lift out styrofoam insert, then using both hands lift
out Konnekt.
• Remove plastic bag from Konnekt.
• Inspect your Konnekt for signs of transit damage.
• In the unlikely event of this having occurred, inform
the carrier and the supplier.
• Keep all the packaging if damage has occurred, as
this will show evidence of excessive handling force.
• It is also a good idea to keep the packaging if possible
for future transportation.
Check contents
The package should contain the following items:
•
Konnekt audio interface
• Power supply
• FireWire cable
• XLR to RCA jacks for connecting a turntable
• CD with software etc.
• Safety Instructions
Computer Requirements
Mac OS
• PowerPC (1 GHz or faster) or Intel CPU
• 256 MB RAM
• FireWire (IEEE 1394) port*
• OS X 10.3.9
Windows
• Pentium 4, 1.6 GHz or faster
• 256 MB RAM
• FireWire (IEEE 1394) port*
• Windows XP
* We recommend running Konnekts on a dedicated FireWire bus.
If your computer has one or more FireWire connections on the
chassis they will typically run on the same FireWire bus. You may
connect the Konnekt to one of these. If you intend to run more
FireWire devices simultaneously, such as e.g. an external hard drive,
we recommend running this device on a separate bus.
This would typically be on an installed FireWire PCI card. Note that
such a FireWire PCI card typically has 3 ports but these also operate
on a single bus.
Software installation
• We recommend installing the software before
connecting the Konnekt.
• Refer to the Konnekt Installation Guide supplied in
the package and on the Konnekt CD.
• If you are familiar with software installation
procedures in general you may simply insert the
accompanying CD-ROM in your computer’s CD drive
and follow the instructions.
TC Near control panel
If Konnekt drivers are installed correctly you are able to
open the TCNear control panel.
On Windows computers:
Press: Start/Programs/TC Electronic/TC Near
The TC Near can also be accessed via the Windows
Control panel.
On Mac computers:
/Applications/TC Near
You may also start the application from System
Preferences.
QUICK SETUP GUIDE