TC Electronic Konnekt Live, Руководство пользователя

Страница: 26 / 60

ROUTING MODES
24
Which routing modes should I choose?
The Fabrik plug-ins can be set to run in either internal or
plug-in mode. Recording and mixing scenarios call for
considerations regarding which routings to use.
Recording
In the typical recording situation you wish to:
-
Monitor the source with no latency.
- Record the source signal. Either dry or processed via
the Fabrik C Live channel strip. Often when working
with a microphone and a pre-amp/channel strip you
will add slight compression and EQ from the pre-amp
and record this signal only. The Konnekt IMPACT™
preamps and Fabric C are excellent tools.
- Listen to the Fabrik R Live reverb on the source signal
as “cue reverb” without recording the reverb.
Processing latency considerations.
The processing latency through the Fabrik Reverb and the
Fabrik Channel Strip will depend on the Buffer Size
setting set on the System Settings page. When monitoring
while recording you can typically accept a short delay on
the Fabrik Reverb but NOT on your Fabrik Channel strip.
Therefore we recommend:
-
Running Fabrik R in Plug-in mode both when
recording and mixing.
- Running Fabrik C in Internal mode when recording
and in Plug-in mode when mixing.