TC Electronic Konnekt Live, Руководство пользователя

Страница: 41 / 60

FABRIK C LIVE
39
• Grab the “C”, “L” or “G” handle using the left mouse button.
• Press and hold the Alt key (Mac: Command key), while moving the mouse in a circle. The “compass” function
is now active and you can select one of 2 to 6 directions.
• Release the Alt key (Mac: Command key)and move the mouse still holding the left mouse button pressed to
select desired values.
• Release mouse button to release the grid.
Adjusting Parameters - Compressor section
As described in the previous section the parameters on the 4 Compression pages are adjusted simply by grabbing and
moving the “S”, “G”, “C” and “L” handles - however, a few extra cool features are available.
Grid
On the Source pages the “S” handle moves in vertical and horizontal directions only, but on the Compression Control, Level
and Gain pages the “C”, “L” and “G” handles move freely in all directions. You may, however, see the advantage of moving
the handle in one direction only. Therefore it is possible to lock a direction in a “grid”.
Compression
- Full-band mode
The Compressor is in Full-band mode when “3-band” is
not marked.
In 3-band mode the Compression Control “C” and the
Level Control “L” handle the distribution of compression
and level between the 3 bands. In Full-band mode these
controls are redundant and not available.
In Full-band mode only Source select “S” and Gain “G”
apply.
See pages 31-32 for application examples of the Full-
band mode.