background image

9

Options

 

 

 

Adjusts display brightness

Allows you to adjust the brightness of the display.

Use Password L1

Change Psw L1

Customize key P2

Display brightness

Display brightness

Adjust the brightness

of the display

80 %

Options

 

 

 

Adjusts display contrast

Allows you to adjust the contrast of the display.

Change Psw L1

Customize key P2

Display brightness

Display contrast

Display contrast

Adjust the display

contrast

37 %

Options

 

 

 

 Menu information

Displays the firmware versions of the T-SIDETD Digital Keyboard and the DC18 card to which 

it is connected.

Sline TD rev: 6.2.0

(ID: AA.02) - Resource:2.11
DC18 rev:8.2 - type 1

(ID: 18.01)

MENU ADJUSTMENTS AND ADVANCED TECHNICAL SETTINGS

This menu gathers all the advanced parameters necessary to adjust the automation in detail.

To access it, it will be necessary to press the keys P3 and P4 at the same time.

When changing one or more adjustments, it will be necessary to update the stroke 

(see "Adjustments  

  To stroke update")

Motion profile

Timings

Technical parameters

Update procedure

TCA

TRA.OP

TRA.CL

Timeout

Timeout

Timeout

movement (0 to 180sec)

180 s

Parameters menu   

 

         Example of “Timeout” adjustment:

Parameters

 

 

 

 Movement profile

Vmax.OP 

adjusts the maximum speed when opening. Corresponds to TM1

Vmin.OP 

adjusts the minimum opening speed while acquiring the run (setup) In nor-

mal run, it will be the minimum speed before stopping.

 

Note. The setup procedure can automatically increase the set value in case 

Vmax.CL 

adjusts the maximum speed when closing. Corresponds to TM2

Содержание T-SIDETD

















Отзывы: