4
MAIN MENU, WORK PROGRAMMES OF THE AUTOMATIC DOOR
The active functions on the board are modified through the main menu. Pressing the 1st key on
the left,
P1
, the various work programmes of the automatic door can be selected:
BOTH DIRECTIONS:
traffic in both directions
ONLY OUT:
traffic only out
ALWAYS CLOSED:
closed locked door
MANUAL:
the door opens and closes by operating it manually
ALWAYS OPEN:
open locked door
ONLY IN:
traffic only in
2 WAY
ONLY EXIT
ALWAYS CLOSE
Base parameters
ALWAYS OPEN
ONLY ENTRY
CUSTOMIZATION OF THE WORKING PROGRAMS OF THE AUTOMATIC DOOR
Through the “
Set key P2
” function, it is possible to enable some options on the work pro-
grammes
A
- No function
B
- OPEN key
key to open the door
In order to assign the required function to the work programme, it is first of all necessary to
assign one of the two options to
P2
button. Push
P4
button, select
Options
Set key P2
from the menu and choose one of the possible functions: NO FUNCTION, OPEN KEY. Now the
required function has been assigned to P2 button and the relating symbol will appear in the
main menu over
P2
button.
In order to enable or disable such function, push P2 button in the main menu.
No function
Manual Operation
Program menu
2 WAY
OPEN key
BASE PARAMETERS SETTING
Pressing the 4th button from the left, P4, you access the PARAMETERS menu; in this section
you can adjust the following parameters:
- PARAMETERS BASE
- DIPSWITCH
- OPTIONS
- INFO
