Taski swingo XP-M, Инструкция по использованию

Страница: 96 / 477

94
1 Control panel
2 Driving handles
3 Emergency stop
4 Horn
5 Driving switch
6 Suction hose
7 Main cord for internal battery charger
8 Electronic parking brake
9 Tread with safety switch
10 Squeegee
11 Squeegee position lock
12 Squeegee support wheel
13 Squeegee holder
14 Squeegee deflecting roller
15 Drive wheel
16 Brush release XP-R
17 Brush
18 Brush unit deflecting roller XP-R
19 Brush unit XP-R
20 Brush release XP-M
21 Micro rotary brush
22 Brush unit deflecting roller XP-M
23 Brush unit XP-M
24 Caster wheel
25 Battery compartment release
26 Drain hose
27 Fresh water tank (Flextank)
28 Recovery tank
29 Pump and intake filter
30 Dirt sieve
31 Tank lid
32 Suction filter
33 Tank lid release
34 Battery display loading
35 Battery/PSU fault display
36 Service display
37 Slow approach button (ON/OFF)
38 Program button (start / stop)
39 ECO mode button (ON/OFF)
40 Recovery tank full display
41 Battery level indicator
42 Key switch
43 Display
44 Brush drive button (ON/OFF), brush pressure but
-
ton (+/-)
45 Suction unit button (ON/OFF)
46 Cleaning solution supply button (ON/OFF), volume
button (+/-)
47 Spot mode button (ON/OFF)
48 Battery display loaded
Batteries
Permissible batteries
Traction batteries are required for the use of this machine (no
starter or device batteries). We recommend the use of pure
traction batteries. Only these batteries guarantee a long ser
-
vice life.
Traction batteries are produced as open (wet-cell) batteries or
as maintenance-free (VRLA) batteries (Gel and AGM). The
machine must be adjusted according to each construction
type and manufacturer.
Each battery has a different service life and performance.
The machine must be programmed after the batteries have
been inserted or if the battery type and/or the manufacturer
have been changed as well as prior to starting the machine.
Incorrect adjustment may result in early battery failure.
Safety measures to be taken when handling the batteries
• Batteries contain acid. Always wear
safety goggles for the maintenance,
installation and removal of wet-cell
batteries.
• Rinse acid splashes in your eyes or
on your skin with plenty of clear wa
-
ter.
Then immediately consult a doctor.
Wash your clothes with water.
• Explosive gas is generated during
battery charging. Keep away from
open fire or glowing embers.
• Do not smoke!
• Danger of acid burns!
• Attention! The battery poles are al
-
ways energized. Therefore do not
deposit any objects on the batteries!
Attention:
Keep batteries clean and dry. Immediately
wipe off leaking acid or water (wet-cell bat
-
teries).
Wear protective gloves for this purpose.
Attention:
Batteries may only be installed by service
agencies or experts approved by Di
-
versey; they must be installed in compli
-
ance with the connection diagram.
Installation and/or connection errors may
result in severe injury, explosion and major
damage to the machine and the environ
-
ment.