TASCAM DR-44WL
9
2 – Names and functions of parts
Icon
On/off status
Blank
Key control function off
Key control function on
Key control function on (setting disabled
state)
3
Reverb on/off status display
This icon shows the reverb on/off status.
Icon
On/off status
Blank
Reverb is off
Reverb is on (sound effects recording) INT
MIC, EXT IN
Reverb is on (SEND status) MIX
4
Speaker output display
displayed: Speaker output on
Blank: Speaker output off
5
Phantom power supply display
Blank: No phantom power supply
: 48V phantom power supplied
: 24V phantom power supplied
6
Power supply status message
When power is supplied from the batteries, the current
battery level is displayed in bars ( , , ).
When the battery level is low, the will flash and the power
will be switched off (standby mode).
When the dedicated AC adapter (GPE053B) supplied with
the product or USB bus power is used,
appears.
NOTE
When attempting recording or other operations that
consume large amount of power, a warning message of
Battery Low
may pop-up.
7
Recorder status message
The recording status is indicated in the following icons:
Indicator
Detail
8
Stop
9
Pause
7
Playback
,
Fast-forwarding
m
Fast-rewinding
/
Skip forward to the beginning of the next
file
.
Skip backward to the beginning of either the
current or preceding file
8
Loop playback setting status display
During loop playback, the
icon is displayed.
9
Filename/song name display
When the 4CH mode is selected, the name or tag infor-
mation of a file being played back is shown.
The ID3 tag information is displayed instead when included
in the MP3 file.
When there are multiple files in the 4CH mode, only the
format portion of each of the file names and the basic
number of a recording file are displayed. When a single file is
recorded, its name is shown.
When the MTR mode is selected, the name of an opened
song is shown.
NOTE
ID3 tag information contains titles and artist names, which
can be stored in MP3 files.
0
Loop playback IN (starting) and OUT (ending) points
setting status
The IN (starting) and OUT (ending) points-setting state of
the loop playback is shown.
When the IN (starting) point is set, the icon appears at the
set position on the playback position-displaying bar.
The icon appears at the playback position on the bar
when the OUT (ending) point is set.
q
Playback position display
The current playback position is shown by a bar. As playback
progresses, the bar extends to the right.
w
Level meter guide display
This is a level meter guide for adjusting the input and output
levels. It is displayed at the “−12 dB” position of the scale.
e
Level meter
This meter displays the level of an input sound or that of a
playback sound.
r
File status display
The file state is displayed in different ways, depending on
the type of a file to be played back.
: Stereo file status
: Status of two mono files
: No file
t
Elapsed time display
Displays the elapsed time (hours: minutes: seconds) of the
current file.
y
Remaining time display
Displays the remaining time (hours: minutes: seconds) of the
current file.
u
Peak value displayed in decibel (dB)
Displays the maximum playback level in decibel reading per
set amount of time.
Recording Screen
The following recording screen is displayed in recording or
recording standby mode.
Recording screen in the 4 CH mode
