20
TASCAM DR-44WL
4 – Recording
phantom power for that jack is OFF. If you connect or
disconnect a microphone while phantom power is being
supplied, that microphone and this unit could be damaged.
•
Turn phantom power ON only when using a condenser
microphone that requires phantom power.
•
Supplying phantom power to some ribbon microphones
will break them. If you are unsure, do not supply phantom
power to a ribbon microphone.
•
When using USB bus power, the unit might not be able to
supply phantom power depending on the computer. If this
occurs, use the dedicated AC adapter (GPE053B) supplied
with the unit instead.
•
Some condenser microphones will not operate when
phantom power is set to +24V.
•
Do not connect or disconnect the AC adapter when using
phantom power. Even when the battery were inserted in
the unit, the power might be cut off, causing data being
recorded to be damaged or lost.
Settings in the “INPUT SETTING”
screen
The contents of the
INPUT
SETTING
screen displayed by
pressing the INPUT button vary depending on which mode to
be selected between 4CH mode and MTR mode.
INPUT
SETTING
screen Tr1 display when in 4CH mode
INPUT
SETTING
screen Tr1 display when in MTR mode
NOTE
When a channel (track) link is turned on, the link status
shown at the bottom of the
INPUT SETTING
screen
will change.
INPUT
SETTING
screen Tr1 display when in 4CH mode
