Your unit should now be fully plumbed and ready to programme.
NOTES TO THE INSTALLER – BEFORE YOU LEAVE
1
Having programmed your unit you will wish to ensure that the unit is
functioning properly before you leave the site.
2
Our Service Department will offer you advice. If you have any queries
do not hesitate to call us.
3
Open the inlet and outlet valve and close the bypass as indicated in the
diagram (page 6). Check that all the plumbing connections are secure
and that there are no leaks.
4
Check that the time of day is correct.
5
Initiate a Regeneration
Hold down the
TOUCH/HOLD
button for about 3 seconds until
RECHARGE
flashes in the display. After a few minutes a small amount
of water will enter the Salt Cabinet. This process will take approximately
4-8 minutes.
Fill with Salt
6
Once the water has run to drain, fill the cabinet with salt and check your
drain connections. You will require a 25kg bag of Pellet salt or Tablet
salt.
DO NOT
use granular salt. Make sure that the brine well cover is
in place and secure as salt must not be allowed to enter the brine well.
Do not fill salt above the overflow. (See Unit explosion diagram page 2).
7
The whole regeneration procedure will take approximately 1 hour. Once
complete softened water will gradually replace the hard water in the
storage tank over a period of normally 7 days. However, this can take
longer in larger houses.
8
Advise the customer that any water fed from the storage tank will not
be softened immediately. Any water drawn directly from the softener
following regeneration will be soft.
9
Ensure that the customer is left with all literature relating to the unit.
10
Return the Guarantee Registration Card to Tapworks.
IMPORTANT – TAPWORKS WATER SOFTENERS HAVE 12 MONTHS
PARTS & LABOUR WARRANTY. YOU CAN EXTEND THIS TO
2 YEARS BY RETURNING THE GUARANTEE REGISTRATION CARD.
WE WILL SEND YOU (WITHIN 28 DAYS) YOUR WARRANTY
CERTIFICATE DETAILING YOUR 2 YEAR GUARANTEE.
If you are a regular user of water softeners you will benefit from joining our
Tapworks Installer Club loyalty scheme. Call 01494 480621 for details.
Thank you for choosing Tapworks.
Finishing Installation
13
Please Remember
– Only use Tablet or Pellet Salt in Your Softener!
