User Information
14
Please Remember
– Only use Tablet or Pellet Salt in Your Softener!
TO REGENERATE TONIGHT
The unit can be programmed to regenerate at the next pre-programmed
time, regardless of its remaining capacity. This is particularly beneficial to
ensure a sufficient softened water supply for an expected heavy water
usage the next day.
Simply press the
TOUCH/HOLD
button once. Recharge tonight will flash
on the display. To cancel recharge tonight, press the
TOUCH/HOLD
button
once and immediately release. The display will return to the time display.
TO REGENERATE NOW
Alternatively, an automatic regeneration can be initiated at any time.
Simply press the
TOUCH/HOLD
button and hold it down for approximately
3 seconds, until a beep sounds. Recharge will flash on the display. The
process will take a few minutes to begin and last approximately 1 hour.
It cannot be cancelled once started.
Use as little water as possible during this time period as hard water will
bypass the water softener. Once the regeneration is complete the recharge
display will disappear.
NOTE:
The unit will automatically flash “recharge tonight” once the
computer calculates that a regeneration is required. This is for information
only – no action is required. At the next programmed regeneration time the
cycle will automatically begin. Once a regeneration is initiated a flashing
“recharge” replaces the flashing “recharge tonight”.
RECHARGE TONIGHT
AM
9:10
RECHARGE
AM
11:00
