TapFlo LPX Series Скачать руководство пользователя

Страница: 67 / 69

10. WARRANTY

Tapflo LPX series

10.2.

Returning parts

When returning parts to Tapflo please follow this procedure:



Consult Tapflo for shipping instructions.



Cleanse or neutralize and rinse the part/pump. Make sure the part/pump is

completely empty from liquid.



Pack the return articles carefully to prevent any damage during transportation.

Goods will not be accepted unless the above procedure has been complied with.

10.3.

Warranty

Tapflo warrants products under conditions as stated below for a period of not more than 5

years from installation and not more than 6 years from date of manufacturing.

The following terms and conditions apply to the sale of machinery, components and

related services and products, of Tapflo (hereinafter “the products”).

Tapflo (the manufacturer) warrants that:

its products are free of defects in material, design and workmanship at the time of

original purchase;

its products will function in accordance with Tapflo operative manuals; Tapflo does

not guarantee that the product will meet the precise needs of the Customer, except

for those purposes set out in any invitation to render documents or other documents

specifically made available to Tapflo before entering into this agreement;

high quality materials are used in the construction of the pumps and that machining

and assembly are carried out to the highest standards.

Except as expressly stated above, Tapflo makes no warranties, express or implied,

concerning the products, including all warranties of fitness for a particular purpose.

This warranty shall not be applicable in circumstances other than defects in material,

design, and workmanship. In particular warranty shall not cover the following:

Periodic checks, maintenance, repair and replacement of parts due to normal wear

and tear (seals, O-rings, rubber items, diaphragms, air valves etc..);

Damage to the product resulting from:

b.1. Tampering with, abuse or misuse, including but not limited to failure to use the

product for its normal purposes as stated at the time of purchase or in accordance

with Tapflo instructions for use and maintenance of the product, or the

installation or improper ventilation or use of the product in a manner inconsistent

with the technical or safety standard in force;

b.2. Repairs performed by non-skilled personnel or use of non-original Tapflo parts;

b.3. Accidents or any cause beyond the control of Tapflo, including but not limited

to lightning, water, fire, earthquake, and public disturbances, etc.;

Содержание LPX Series






































































Результаты поиска

Содержание LPX Series

Отзывы:

Похожие инструкции для LPX Series

Бренды по названию

Популярные бренды

TapFlo LPX Series, Руководство Iom

Результаты поиска

Содержание LPX Series

Отзывы:

Похожие инструкции для LPX Series

Бренды по названию

Популярные бренды