Introduction
8
CAUTION
Please note that this Introductory Manual has been written based on the
presupposition that details about set-up of any necessary equipment to enable
network connection have already been taken care of by the user and that
connection has been confirmed as workable.
T&D Corporation shall not be responsible for any damages which a contractor, a user or a
third party may suffer, whether direct or indirect, due to the inability to communicate or use
communication devices.
Further, T&D is not responsible for any damage, malfunction or trouble,
whether direct or indirect, caused by the use of our products.
This Unit has been designed for private and/or industrial use only.
It is not for use in situations where strict safety precautions are necessary such
as in connection with medical equipment, whether directly or indirectly.
Harmful gases or chemicals may cause corrosion and/or other danger to the
Unit. Also, coming in contact with hazardous substances, may cause harm to
people handling the Unit. Therefore, do not use or store the Unit in any
environment that is exposed to chemicals and/or harmful gases.
This Unit is not waterproof.
If the Unit gets dirty, wipe it with a clean cloth.
Do not store, leave, or use the Unit in any place exposed to direct sunlight,
high temperature, extremely low temperatures, or high humidity.
This may cause deformation to both the outside casing and the inside. It may also cause
condensation on the inside of the Unit leading to fire or electrocution.
Battery terminals may provide insufficient contact due to age or vibration.
This may lead to data loss.
Battery terminals may provide insufficient contact due to age or vibration.
This may lead to data loss.
Battery life varies depending upon the type of battery, the measuring environment,
frequency of communication, ambient temperature in which it is used, and battery
performance.
If the Unit is not to be used for a long period of time, for safety reasons please
remove the battery.
Leaving batteries inside the Unit may cause battery leakage and malfunction.
Do not use an AC adaptor other than one that is specified for use with the Unit.
Doing so may cause fire or malfunction.
Please do not insert fingers or foreign objects into cable connection jacks.
Make sure that all cable plugs are inserted fully, so as not to cause an
improper connection. Also, when unplugging cables from the Unit, do not pull
the cord, but hold the connector to disconnect.
