Carrying out Registration, Settings, and
Operation
This section explains a few items that need to be checked before
carrying out registration and settings for the Base Units, Remote Units,
and Repeaters via the software, and before starting operation.
Process of Making Registrations and Settings --38
1. Make Settings for Base Units -------------------------------38
2. Register Data Loggers as Remote Units ----------------38
3. Register Repeaters (when necessary) -------------------38
4. Check Wireless Signal Strength and
Make Wireless Route Settings -----------------------------39
About Applications and the Operation Guide ---40
How to Open the Applications ---------------------------------40
Communication between RTR-500DC and PC 41
Operations which require
RTR-500DC
PC Communication ----------------------41
Communication between
Remote Unit / Repeater and PC ------------------42
Operations which require
Remote Unit / Repeater
PC Communication --------42
Wireless Communication between
RTR-500DC and Remote Unit ----------------------43
Operations which require
RTR-500DC
Remote Unit Wireless Communication 43
Operating Remote Units via Multiple RTR-500DC Units 43
How to Register the Same
Remote Unit to Multiple RTR-500DC Units ----------------43
Optical and Cable Communication between
RTR-500DC and Remote Units ---------------------44
Operations which require RTR-500DC
Remote Unit Optical and Cable Communication -------44
Optical Communication: RTR-501 / 502 / 503 -------------44
Cable Communication: RTR-574 -----------------------------44
