13
Introduction
the Base Unit read the Remote Unit info directly without using the software. In this
way it is not necessary to repeat the Remote Unit registration process.
Starting and Stopping Recording
It is possible to set to start and stop recording for a Data Logger from the
RTR-500DC.
Features of the RTR-500DC
Graph Display of Recorded Data on High Quality LCD
It is possible to view the data collected from Data Loggers in graph form on the
RTR-500DC LCD. Here you can check whether a set Upper / Lower Limit has
been exceeded or not, as well as, the highest and lowest readings.
Holds up to 15 Remote Units at Full Storage Capacity
When downloading units at non-full storage capacity, it can store and manage up
to 250 downloading sessions.
Easy One-Hand Operation
The handy Operation Dial makes the operation of the RTR-500DC simple; moving
the dial up and down displays the various menu selections which can be easily
selected by pressing in on the dial.
Data Backup Function
When battery power becomes low, the Unit will automatically go into sleep mode
in order to protect the data. After going into sleep mode, the Unit can retain
recorded data for about a month.
Various Power Supplies and Energy Saving Function
It is possible to supply power to the RTR-500DC from any of the following: AAA
alkaline batteries, AAA Ni-MH batteries, USB bus power, or AC adaptor (optional).
The energy saving function will automatically turn off the Unit to save battery
power if the Unit is not used for about three minutes.
Firmware Update Function
The firmware can be easily updated by connecting the target RTR-500DC with a
USB communication cable to the computer. As newly compatible devices are
released, firmware updates will be periodically released to support these
changes. For more about how to update firmware and the latest update
information, visit our T&D website (http://www.tandd.com/).
