Getting Ready
28
About the USB Device Drivers
Have you already installed the supplied software?
Make sure to install the software before connecting the Unit to a PC with a USB cable.
For Units using a USB connection, it is necessary to first install the
Software, and upon connecting the Unit to the PC with a USB cable it is
necessary to install the USB Device Driver. The USB Device Driver
enables the PC to recognize a connected device and ensure proper
operation.
- Make sure that the USB cable is inserted fully, so as not to cause an improper
connection.
- Login using a User Account with Administrator (Computer Administrator) rights.
Users of Windows XP must carry out the Installation Procedure.
The first time a Unit is connected to your PC, the [New Hardware Detection
Wizard] will automatically open.
Please carry out the procedures on the following pages to install the USB Device
Drivers for the Base Unit (RTR-500DC), Remote Units (RTR-574), and if
necessary, Repeaters (RTR-500).
- In XP, if the Wizard window does not automatically open, installation may have not
been fully completed or failed. Please check whether the USB Device Driver has
been properly installed by following the directions on page 31.
Users of Windows Vista or Windows 7 do not have to carry out this
installation.
By installing the supplied software, the USB Device Drivers for the Base Unit,
Remote Units and Repeaters will also be automatically installed. It is not
necessary to carry out any extra steps to install the USB Device Driver.
- To check a USB Device Driver, follow directions as shown in this Manual on page 31.
