TANDBERG Voyager E5784 Скачать руководство пользователя

Страница: 29 / 384

Installing the Equipment

Reference Guide: Voyager E5784 and E5788 HD DSNG Encoder

Page 2-7

ST.RE.E10137.3

2.4

AC Mains Operating Voltage and Earthing

2.4.1 AC

Power

Supply

CAUTION...

This product should be operated only from the type of power source indicated on the marking label. If

you are not sure of the type of power supply to your business, consult a qualified electrical engineer or

your local power company.

See Annex B, Technical Specification for a full power supply specification.

There are no links or switches to be altered for operation from different

a.c. supplies.

2.4.2

Power Cable and Earthing

General

Check that the a.c. power cable is suitable for the country in which the

Encoder is to be used.

WARNINGS...

1. IF THE MOULDED PLUG FITTED TO THE MAINS CABLE SUPPLIED WITH THIS UNIT IS NOT

REQUIRED, PLEASE DISPOSE OF IT SAFELY. FAILURE TO DO THIS MAY ENDANGER LIFE

AS LIVE ENDS MAY BE EXPOSED IF THE REMOVED PLUG IS INSERTED INTO A MAINS

OUTLET.

2. POWER-SUPPLY CORDS SHOULD BE ROUTED SO THAT THEY ARE NOT LIKELY TO BE

WALKED ON OR PINCHED BY ITEMS PLACED UPON OR AGAINST THEM, PAYING

PARTICULAR ATTENTION TO CORDS AT PLUGS, CONVENIENCE RECEPTACLES, AND THE

POINT WHERE THEY EXIT FROM THE APPLIANCE.

The unit is supplied with three, detachable mains-supply cables fitted with

moulded plugs suitable for the USA, UK or Europe.
The wires in the mains cable are coloured in accordance with the wire

colour code shown in Table 2.1.

Table 2.1: Supply Cable Wiring Colours

(BS 1363)

EUROPE
(CEE 7/7)

USA
(NEMA 5-15P)

Earth:

Green-and-yellow Green-and-yellow Green

Neutral:

Blue Blue White

Live:

Brown Brown Black

If the colours do not correspond with the coloured markings identifying the

terminals in a locally supplied plug, proceed as in Table 2.2 (included for

reference).

Содержание Voyager E5784

































































































































































































































































































































































































Результаты поиска

Содержание Voyager E5784

Отзывы:

Похожие инструкции для Voyager E5784

Бренды по названию

Популярные бренды

TANDBERG Voyager E5784, Справочное руководство

Результаты поиска

Содержание Voyager E5784

Отзывы:

Похожие инструкции для Voyager E5784

Бренды по названию

Популярные бренды