TANDBERG Voyager E5784, Справочное руководство

Страница: 240 / 384

Operating the Equipment Locally: ATM Network Interface Option Module
Page 4-130 Reference Guide: Voyager E5784 and E5788 HD DSNG Encoder
ST.RE.E10137.3
Table 4.161: Delete Authorisation Options
Selected Option Description
Retain Keeps the authorisation.
Delete Deletes the authorisation.
4.11.11 Edit Authorisation Option
Press the associated softkey to edit the selected Authorisation.
Further screens appear which are the same as those on page 4-129.
4.11.12 Incoming Calls Option
This enables the Incoming Calls to be changed.
Table 4.162: Incoming Calls Options
Selected Option Description
Permit All Accepts calls from any ATM address.
Refuse All No incoming calls accepted.
Authorisations Only accepts calls which are in the authorisations list.
4.11.13 General Menu
IP
21
Address Option
This is a network address used to identify the ATM interface when plugged
into an Ethernet network via the 10BaseT socket on the card. Use the
keypad to amend the IP Address.
IP NetMask Option
Use the keypad to amend the IP NetMask.
IP Gateway Option
This option gives the default gateway address used on the Ethernet
network interface connected via the 10BaseT socket. Any communications
to network hosts not on the local IP network will be sent to this address.
Default ATM Prefix Option
This option is a 26 digit hexadecimal number identifying the ATM address
prefix defined by the connected ATM network operator. This only needs to
be specified if the ATM network does not support Integrated Layer
Management Interface (ILMI) which normally sets this prefix automatically
21
Internet Protocol.