TANDBERG Voyager E5784 Скачать руководство пользователя страница 134

Страница: 134 / 384

Operating the Equipment Locally — Setup Menu: Video Menu

Page 4-24

Reference Guide: Voyager E5784 and E5788 HD DSNG Encoder

ST.RE.E10137.3

Network Id Option

This enables the Network Identity to be specified. The information is

included in the NIT.

NOTE…
This option is not displayed if the unit is set to generate PSIP externally or it is under MEM control.

Service Id Option

This option ties the SDT to the PMT and is the same as the Program

Number in ATSC. This enables the Service Identity to be specified. The

information is included in the PAT, PMT, SDT, EIT and NIT.

NOTE…
This option is not displayed if the unit is set to generate PSIP externally or it is under MEM control.

Transport Stream Id Option

This sets the Transport Stream ID value for the transport stream output

from the Encoder.

NOTE…
This option is not displayed if the unit is set to generate PSIP externally or it is under MEM control.

Service Type Option

The service type identifies the type of service carried. The options are:

Analog TV, Digital TV, Digital Radio, Teletext, and Data Broadcast. The

information is included in the SDT.

PMT PID Option

This shows the Program Map Table Packet Identifier.

Stream ID Descriptor Option

This option turns on or off the insertion of a stream identifier descriptor

within the PMT.

Dolby AC-3 Descriptor Option

This allows a user to specify only the DVB, only the ATSC, or both the

ATSC and DVB descriptors for use with audio streams.
It is necessary because the ATSC descriptor existed prior to the DVB

descriptor and some Decoders (e.g. early Alteias) used the AC-3 descriptor

for identifying Dolby Digital AC-3 streams.

NOTE…
This is only available when the syntax is set to DVB.

Содержание Voyager E5784

































































































































































































































































































































































































Результаты поиска

Содержание Voyager E5784

Отзывы:

Бренды по названию

Популярные бренды

TANDBERG Voyager E5784, Справочное руководство

Результаты поиска

Содержание Voyager E5784

Отзывы:

Бренды по названию

Популярные бренды