TANDBERG Voyager E5784 Скачать руководство пользователя

Страница: 224 / 384

Operating the Equipment Locally: Output Menu - Output Format = IP Streamer (M2/EOM2/IP/PROFEC)

Page 4-114

Reference Guide: Voyager E5784 and E5788 HD DSNG Encoder

ST.RE.E10137.3

Destination x UDP Port Option

Up to four separate UDP Ports can be assigned.
This configures the UDP destination port field in the outgoing UDP frames.

Time To Live Option

This is the Time-to-Live setting as specified in RFC-791. The Time-to-Live

setting is decremented by one for each Router hop the IP frame does.

When 0 (zero) is reached, the packet is discarded by the network. A value

greater than one is recommended.

Type of Service Option

This option is the byte value of the Type-of-Service (TOS) field in the IP

header as specified in RFC-791. It is used for Class-of-service

prioritisation. It depends on the Router honouring this field.

Line Mode

This option allows the User to allow the IP Streamer card to automatically

(Auto) negotiate the port speed and mode as the port automatically

advertises its maximum capabilities. If set to Fixed, the line speed is fixed

to 100 Mbits/s Full Duplex mode. Auto is the default and preferred setting.

4.9.11 Output Format = G.703 Output

Introduction

The

G.703 Output

is selected from the

Output Menu

. The G.703

Interface Module enables a Broadcast Application to interface an Encoder

to a G.703 Telecommunication Network. The card only provides a transmit

source of a DVB service over a G.703 network. See Figure 4.15 for the

menu structure.

NOTE…
The G.703 card is only compatible with TANDBERG Television’s MkII G.703 Input card.

PDH Rate Option

This option sets the overall G.703 Interface Module’s line rate at either the

E3 (34.368 Mbit/s) or DS3 rate (44.736 Mbit/s).

Framing Option

This option sets the G.703 Interface Module’s E3 or DS-3 framing mode.

The modes for E3 are None and G.832. The DS-3 modes are None, M13 or

c-bit. The selectable modes are dependent upon what the PDH Rate is set

to.

DS-3 Signal Level Out Option

NOTE…
Only available for the DS-3 PDH Rate selection.

Содержание Voyager E5784

































































































































































































































































































































































































Результаты поиска

Содержание Voyager E5784

Отзывы:

Похожие инструкции для Voyager E5784

Бренды по названию

Популярные бренды

TANDBERG Voyager E5784, Справочное руководство

Результаты поиска

Содержание Voyager E5784

Отзывы:

Похожие инструкции для Voyager E5784

Бренды по названию

Популярные бренды