Tanaka TVC-270S Скачать руководство пользователя страница 6

Страница: 6 / 88

MEANINGS

SYMBOLS

NOTE:

Some units do not carry them.

Symbols

WARNING

The following show symbols used for the

machine. Be sure that you understand

their meaning before use.

Gloves should be worn when

necessary, e.g., when assembling

cutting equipment.

It is important that you read, fully

understand and observe the following

safety precautions and warnings.

Careless or improper use of the unit may

cause serious or fatal injury.

Use anti-slip and sturdy footwear.

Read, understand and follow all warnings

and instructions in this manual and on

the unit.

Blade thrust may occur when the

spinning blade contacts a solid object

in the critical area. A dangerous

reaction may occur causing the entire

unit and operator to be thrust violently.

This reaction is called blade thrust. As

a result, the operator may lose control

of the unit which may cause serious or

fatal injury. Blade thrust is more likely

to occur in areas where it is di

ﬃ

cult to

see the material to be cut.

Always wear eye, head and ear

protectors when using this unit.

Do not use metal/rigid blades when this

sign is shown on the unit.

Indicates blade guard location for a

trimmer head or Brain head.

Keep all children, bystanders and helpers

15 m away from the unit. If anyone

approaches you, stop the engine and

cutting attachment immediately.

Indicate handle location. Do not attach

handle above this point.

Be careful of thrown objects.

WARNING

• Read the Operator’s Manual and follow all warnings and safety

instructions. Failure to do so can result in serious injury to the

operator and/or bystanders.

• Objects may be thrown or ricochet in all directions. ALWAYS WEAR

EYE PROTECTION.

• Keep bystanders at least 15 m away.

• To reduce the chance of hearing loss, always wear ear protection.

• To reduce the risk of injury from loss of control, never use a metal

blade on a curved shaft grass trimmer. Never use a metal blade on

any brush cutter without barrier bar or bicycle handle con

guration

and safety strap.

• Use of a blade may cause a sudden sideways, forward or backward

motion of the brush cutter when the blade contacts a solid object.

See Owner

s manual for model speci

c details.

Shows maximum shaft speed. Do not use

the cutting attachment whose max rpm is

below the shaft rpm.

Before

using

your

machine

• Read the manual carefully.

• Check that the cutting equipment is correctly assembled and

adjusted.

• Start the unit and check the carburetor adjustment. See

“MAINTENANCE”.

Contents

WHAT IS WHAT ................................................................................ 7

WARNINGS AND SAFETY INSTRUCTIONS .................................. 8

SPECIFICATIONS ............................................................................ 9

ASSEMBLY PROCEDURES ........................................................... 10

OPERATING PROCEDURES ......................................................... 11

MAINTENANCE .............................................................................. 11

000Book̲TBC270S̲EE.indb 6

2012/07/12 15:43:04

Содержание TVC-270S

























































































Результаты поиска

Содержание TVC-270S

Отзывы:

Похожие инструкции для TVC-270S

Бренды по названию

Популярные бренды

Tanaka TVC-270S, Инструкция по эксплуатации

Результаты поиска

Содержание TVC-270S

Отзывы:

Похожие инструкции для TVC-270S

Бренды по названию

Популярные бренды